TYRELEVERS

Online Store | TYREPLIERS |  TYRELEVERS

600mm Tyre Lever - Forged One End

600mm Tyre Lever - Forged One End

Quantity:

Quantity
1 x 600mm Tyre Lever 41.50
2 x 600mm Tyre Levers 80.00

600mm Tubeless//Tubed 4x4 & Light Truck Tyre Levers

LEV100

The tyre levers are 19mm in diameter; are manufactured from high grade BHP steel, are hot forged and heat treated. The levers are forged on one end only as the other end, being 19mm in diameter, fits truck and four wheel drive wheel braces and truck load binders. This gives the lever the dual purpose of being able to be used as a universal bar. The lever is extremely strong and will not bend under normal use. The levers are zinc plated and then finished with a zinc blue.




600mm Tyre Lever - Forged Both Ends

600mm Tyre Lever - Forged Both Ends

Quantity:

Quantity
1 x 600mm Tyre Lever 46.50
2 x 600mm Tyre Lever 90.00

600mm Tubeless//Tubed 4x4 & Light Truck Tyre Levers

LEV102

The tyre levers are 19mm in diameter; are manufactured from high grade BHP steel, are hot forged and heat treated. The lever is forged both ends to allow removal and refitting of tyres. The spoon end of the lever is designed to remove the tyre whilst the hooked end is specifically designed to re-fit the tyre to the rim. The design of the re-fitting end prevents the tyre from creeping up the lever which can hinder the tyre going back over the rim. This is a real advantage when re-fitting the tyre, and makes the whole job much easier.




600mm Tyre Lever - Pair 01

600mm Tyre Lever - Pair 01


Price: 84.00

Quantity:

600mm Tubeless//Tubed 4x4 & Light Truck Tyre Levers

One of Each Lever;
LEV100 - 600 x 19mm Forged One End
LEV102 - 600 x 19mm Forged Both Ends

The tyre levers are 19mm in diameter; are manufactured from high grade BHP steel, are hot forged and heat treated. The levers are forged on one end only as the other end, being 19mm in diameter, fits truck and four wheel drive wheel braces and truck load binders. This gives the lever the dual purpose of being able to be used as a universal bar. The lever is extremely strong and will not bend under normal use. The levers are zinc plated and then finished with a zinc blue.

The Second lever is forged both ends to allow removal and refitting of tyres. The spoon end of the lever is designed to remove the tyre whilst the hooked end is specifically designed to re-fit the tyre to the rim. The design of the re-fitting end prevents the tyre from creeping up the lever which can hinder the tyre going back over the rim. This is a real advantage when re-fitting the tyre, and makes the whole job much easier.


800mm Tyre Lever - Forged One End

800mm Tyre Lever - Forged One End

Quantity:

Quantity
1 x 800mm Tyre Lever 44.50
2 x 800mm Tyre Lever 85.00

800mm Tubeless//Tubed Agricultural, Lorry & Heavy 4x4 Tyre Levers

LEV110

The tyre levers are 19mm in diameter; are manufactured from high grade BHP steel, are hot forged and heat treated. The levers are forged on one end only as the other end, being 19mm in diameter, fits truck and four wheel drive wheel braces and truck load binders. This gives the lever the dual purpose of being able to be used as a universal bar. The lever is extremely strong and will not bend under normal use. The levers are zinc plated and then finished with a zinc blue.




800mm Tyre Lever - Forged Both Ends

800mm Tyre Lever - Forged Both Ends

Quantity:

Quantity
1 x 800mm Tyre Lever 44.50

800mm Tubeless//Tubed Agricultural, Lorry & Heavy 4x4 Tyre Levers

LEV105

The tyre levers are 19mm in diameter; are manufactured from high grade BHP steel, are hot forged and heat treated. The lever is forged both ends to allow removal and refitting of tyres. The spoon end of the lever is designed to remove the tyre whilst the hooked end is specifically designed to re-fit the tyre to the rim. The design of the re-fitting end prevents the tyre from creeping up the lever which can hinder the tyre going back over the rim. This is a real advantage when re-fitting the tyre, and makes the whole job much easier.



Sorry - Temporarily out of stock

800mm Tyre Lever - Pair 01

800mm Tyre Lever - Pair 01


Price: 84.00

Quantity:

800mm Tubeless//Tubed Agricultural, Lorry & Heavy 4x4 Tyre Levers

One of Each Lever;
LEV110 - 800 x 19mm Forged One End
LEV105 - 800 x 19mm Forged Both Ends

The tyre levers are 19mm in diameter; are manufactured from high grade BHP steel, are hot forged and heat treated. The levers are forged on one end only as the other end, being 19mm in diameter, fits truck and four wheel drive wheel braces and truck load binders. This gives the lever the dual purpose of being able to be used as a universal bar. The lever is extremely strong and will not bend under normal use. The levers are zinc plated and then finished with a zinc blue.

The Second lever is forged both ends to allow removal and refitting of tyres. The spoon end of the lever is designed to remove the tyre whilst the hooked end is specifically designed to re-fit the tyre to the rim. The design of the re-fitting end prevents the tyre from creeping up the lever which can hinder the tyre going back over the rim. This is a real advantage when re-fitting the tyre, and makes the whole job much easier.

Sorry - Temporarily out of stock

800mm Tyre Lever - JAMAC (Army)

800mm Tyre Lever - JAMAC (Army)

Quantity:

Quantity
1 x 800mm JAMAC Lever 54.00
2 x 800mm JAMAC Lever 103.00

800mm JAMAC Tubed/Tubeless Tyre Lever

LEV120

The JAMAC or "Army Style" Tyre Lever is generally used on Tubed Agricultural, Lorry & Heavy 4x4 Tyre Levers with Slit or Safety Rims.

The JAMAC Lever has been designed for the Removal & Refitting of tyres on what's usually known as "Safety Rims" or "Split Rims"
They are designed to assist in the removal & refitting of the steel band on the wheel rims commonly found on Military, Mining & Agricultural Wheel Rims.

Regularly found on Toyota & Nissan vehicles working in mines or other harsh terrain.


800mm Tyre Lever - Pair 02

800mm Tyre Lever - Pair 02


Price: 93.00

Quantity:

800mm Tubeless//Tubed Agricultural, Lorry & Heavy 4x4 Tyre Levers

One of Each Lever;
LEV105 - 800 x 19mm Forged Both Ends
LEV122 - 800 x 19mm JAMAC Lever

This set should be able to cope with the toughest of tyre and wheel rim combinations found on Tubeless//Tubed Agricultural, Lorry & Heavy 4x4's usually found in Military, mining or other harsh environments.


Sorry - Temporarily out of stock

200mm Motor Cycle Tyre Lever Forged Both Ends

200mm Motor Cycle Tyre Lever Forged Both Ends


Price: 23.00

Quantity:

200mm Tubed Motorcycle Tyre Lever - Individual

The tyre lever is 13mm in diameter; manufactured from high grade BHP steel and is hot forged and heat treated. The lever is forged both ends to allow removal and refitting of tyres.

Part Number - LEV135



200mm Motor Cycle Tyre Lever Forged Both Ends - Pair

200mm Motor Cycle Tyre Lever Forged Both Ends - Pair


Price: 45.00

Quantity:

200mm Tubed Motorcycle Tyre Levers

The tyre levers are 13mm in diameter; are manufactured from high grade BHP steel, are hot forged and heat treated. The lever is forged both ends to allow removal and refitting of tyres.

Part Number - LEV136



300mm Motor Cycle Tyre Lever Forged Both Ends

300mm Motor Cycle Tyre Lever Forged Both Ends


Price: 24.00

Quantity:

300mm Tubeless Motorcycle Tyre Lever - Individual

The tyre lever is 13mm in diameter; manufactured from high grade BHP steel and is hot forged and heat treated. The lever is forged both ends to allow removal and refitting of tyres.

Part Number - LEV130


300mm Motor Cycle Tyre Lever Forged Both Ends - Pair

300mm Motor Cycle Tyre Lever Forged Both Ends - Pair


Price: 46.00

Quantity:

300mm Tubeless Motorcycle Tyre Levers - Pair

The tyre levers are 13mm in diameter; are manufactured from high grade BHP steel, are hot forged and heat treated. The lever is forged both ends to allow removal and refitting of tyres.

Part Number - LEV131


Online Store | TYREPLIERS |  TYRELEVERS